DIAMOND AIRCRAFT
7 . 2 . 3 Tail
HK 3 6 TS
FLIGHT MANUAL
systems Description
Rudder , elevator and hori zontal stab i l i z er are manufactured in half
shel l sandwich construction . The folded-top antenna for the COM
equipment and the pitot tube mount are placed in the vertical
stabi l i zer . The hor i zontal tail surfaces are attached with two bolts
and a fastening screw .
7 . 3
FLIGHT CONTROLS
7 . 3 . 1
controls
Ailerons and e l evator are driven by push-rods , the rudder is driven
through control cabl e s . Elevator control f orces can be compensated
by means of a spring trim system .
The aileron and air brake control systems are automatically connected
when the wing is insta l l e d . However , the strobe and position l ights
( optional equipment ) must be connected . The e l evator control system
must be connected by hand .
7 . 3 . 2 Elevator trim
The green colored trim knob is located in the center console behind
the throttle quadrant . To trim the airplane unlock the knob by pul l ing
up , then move it to the desired position . The knob is spring-loaded
and catches when it is released .
Knob forward
=
NOSE DOWN
Revis ion No .
Date
Source
Doc . No .
Issue
Page No .
3 . 0 1 . 0 6
Jan 1 9 9 6
7 - 3
