Dialogic
®
DSI SS7G41 Signaling Server – SIU Mode Release Notes
Release 1.2.10
35
Release 1.2.10
1
Overview
This is a maintenance release containing a number of changes and
corrections as detailed below.
It corrects an important issue relating to M3UA route availability (see 3.8
below) which was introduced in Release 1.2.0. Consequently any users of
Release 1.2.0 and later are advised to upgrade to this release.
The release also introduces the ability to configure the TCAP idle dialogue
timeout from within config.txt.
This is the first Generally Available release since 1.2.5 and it is fully
backwards compatible with that release.
1.1
Applicability
This release is suitable for all users.
1.2
Resolved Customer Issues
The following customer issues are resolved in this release: IPY00102249,
IPY00102349 and IPY00102543.
2
New Functionality
2.1
TCAP Idle Dialogue Timeout
This release allows the timeout value for the TCAP Idle Dialogue Timeout to
be configured in the config.txt file using a new TCAP_TIMER command which
has the following syntax where the <reserved> field should be set to zero
and the <value> is the timeout value in seconds.
TCAP_TIMER <reserved> TDLG_IDLE_TOUT <value>
3
Other Changes
3.1
CNCGP Command - Extended options
This release corrects the extended options field (the most significant 16 bits
of the 32 bit OPTIONS parameter) in the Circuit Group configuration display.
Previously this was not displayed for inactive circuit groups.
3.2
MNSSI Command – Additional Diagnostics
This release enhances operation of the diagnostic snapshot creation command
MNSSI in order to provide additional system parameters relating to hard drive
and Ethernet port status.
3.3
MRRKP Command - Routing Key Print
This release corrects the value displayed for Custom Profile (CP) in the
Message Router Routing Key configuration.
