Dialogic
®
DSI SPCI Network Interface Boards Programmer's Manual Issue 5
85
Parameter Description:
Error Code
The Error Code
is coded as shown in the following table:
Value
Mnemonic
ID
Description
0x31
S7E_RESET_ERR
MTP2 Failed to initialize.
0x33
S7E_POOL_EMPTY
l2_llid
No free buffers in MTP2 transmit pool.
0x34
S7E_TX_FAIL
l2_llid
Failed to send LSSU/FISU to driver.
0x35
S7E_HDR_ERR
l2_llid
No room to add level 2 header, SU not
transmitted.
0x36
S7E_LEN_ERR
l2_llid
Length Error, SU not transmitted.
0x37
S7E_MSU_SEND
l2_llid
Failed to send SU to lower layer, protocol
should handle retransmission.
0x39
S7E_BAD_PRIM
l2_llid
MTP2 unable to accept primitive.
0x3a
S7E_BAD_LLID
l2_llid
Invalid l2_llid in HDR structure.
0x3b
S7E_MEM_ERR
l2_llid
MTP2 memory allocation error.
0x3c
S7E_RTVL_ERR
l2_llid
MTP2 failure to perform retrieval.
0x51
MTP_BAD_PRIM
0
MTP3 unable to accept primitive.
0x52
MTP_POOL_EMPTY
0
No free frames in MTP3 transmit pool.
0x53
MTP_TX_FAIL
0
MTP3 failed to send MSU to lower layer.
0x54
MTP_LEN_ERR
0
MSU too long for buffer.
0x55
MTP_SLT_FAIL
link_id
Signaling link test failure.
0x57
MTP_TALLOC_ERR
0
MTP3 Failed to allocate T_FRAME.
0x58
MTP_BAD_ID
0
Invalid ID in message HDR.
0x59
MTP_MALLOC_ERR
0
MTP3 unable to allocate MSG.
0x5a
MTP_BSNT_FAIL
link_id
Failure to retrieve BSNT.
0x5b MTP_RTV_FAIL link_id
Retrieval
failure.
0x5c
MTP_BAD_FSN
link_id
Erroneous FSN in COA.
0x5d
MTP_BAD_COO
link_id
COO received after changeover complete.
0x5e MTP_SNMM_ERR
0 Internal
software
error.
0x5f MTP_SLTM_ERR
0 Internal
software
error.
0x60
MTP_NO_COA
link_id
Failed to receive COA.
0x61
MTP_NO_CBA
link_id
Failed to receive CBA.
0x66
MTP_TIM_ERR
timer ref
MTP3 attempt to re-use active timer resource.
0x67
MTP_RRT_OVRFLW
Messages discarded due to overflow of Re-
Routing buffer.
0x68
MTP_FLUSH_FAIL
link_id
MTP3 failed to receive Flush Ack from level 2.
0x69
MTP_FLUSH_L2
link_id
MTP2 transmission buffers flushed (due to
RPO).
