© Dialog Semiconductor 2008. All rights reserved.
All brand and product names are trademarks or service marks of their respective owners. Printed in Europe.
DA852X-UG02-608 Page 43 of 47
User Guide Release 2.0
DA852X E Ink Evaluation Kit
Display Controllers
6
Cascade Connection
Using the Expansion connectors, multiple boards of any type can be connected together to produce a display driver of
any size. The software supports this mode of operation. It is assumed that the output connectors used will be the
1.27mm IDC headers, connected via ribbon cable to a remote display, unless the display in use has multiple connection
tapes.
A special PCB (part number 44-179-73-08A) is required to connect boards together, please contact your supplier if this
has not been supplied with a purchase of two or more eval kits.
Points to note:
•
The second (slave) driver is configured for external power supply and external 15v.
•
The second (slave) driver board has jumpers JP2 and JP3 removed.
Remove
USB cable
