© Dialog Semiconductor 2008. All rights reserved.
All brand and product names are trademarks or service marks of their respective owners. Printed in Europe.
DA852X-UG02-608 Page 37 of 47
User Guide Release 2.0
DA852X E Ink Evaluation Kit
Display Controllers
Figure 20.
Zoomed image showing map areas
If you make a mistake, use Undo (Edit>Undo Last map Entry, Ctrl Z, or the Undo icon
to highlight and delete a box.
You can view the full display again by View>Zoom Full or the icon
, and refresh the display by View>Refresh, Ctrl F5,
or the icon
.
When you have completed this, and mapped all areas to segment outputs, you can turn off Map Entry mode, turn off the
Map view mode, and test the mapping.
First reset the display by File>Reset Display. The display should turn black, then all white.
Make sure that Update Mode is set to Immediate.
Now click on any segment on the image map. The segment should fill with the colour you have selected and the
corresponding segment on the display should turn black.
If all segments are correct, enjoy the moment, grab a coffee, you’re most of the way there!
If there are segments not mapped yet, enter map entry mode again and add more rectangles.
