© Dialog Semiconductor 2008. All rights reserved.
All brand and product names are trademarks or service marks of their respective owners. Printed in Europe.
DA852X-UG02-608 Page 11 of 47
User Guide Release 2.0
DA852X E Ink Evaluation Kit
Display Controllers
If installed correctly, Dialog USB Driver (EZUSB) should be listed on Device Manager as shown above.
If you are using Windows XP, you may get a message saying that a USB2 device is attached to a USB1.1 port. This can
safely be ignored.
To uninstall the software please use the Windows ‘Add/Remove Programs’ function that can be found under ‘Start’-
>’Settings’->’Control Panel’.
Note: This procedure may need to be repeated if the USB Interface is plugged into a different USB Port. This is a
“feature” of Windows, which identifies a USB driver as “belonging” to the port on which it was installed.
The software has not been tested extensively on Windows Vista, but no problems have been identified with the software
or device driver installation. If the software is installed into the “Program Files” directory, it may not be possible to edit
text files, since these are “virtualised” into the Users home folder. The software will (probably) require an administrator
privelige to install.
3.1.3
Control Panel
Run the “DA852X” program by clicking the shortcut in the Start menu Start>Programs>Dialog Semiconductor>Display
Controllers>DA852X_nnn.exe (where nnn is the latest version number). The best setting for the PC display size is
1024x768 pixels.. It is important to note that a display size other than the recommended setting may affect the way in
which the panels appear. It will operate with both normal and large fonts.
Figure 3.
Initial Interface
