DLEV1
Operating Instructions
- 22 -
8 Maintenance
When using the test adaptor in compliance with the user manual, no
special maintenance is required.
Should a functional error occur during normal operation, the Di-LOG
after-sales service team will repair your instrument. Please contact our
service department for further information.
Before maintaining the DLEV1 ensure that it is
disconnected from all voltage! Danger of Electric Shock!
8.1 Cleaning
Clean the external case of the DLEV1 with a clean dry cloth.
Avoid using solvents and abrasive scouring agents to clean the external
case of the DLEV1.
After cleaning, do not use the test adaptor until it has dried completely.
8.2 Replacing the Fuse
Before opening the DLEV1 ensure that it is disconnected
from all voltages! Electric shock danger!
All replacement fuse types are specified for ratings and
size within this instruction manual and on the rear of the of
the DLEV1.
Disconnect all the test leads from the unit.
Position the DLEV1 face down and turn the fuse holder cap ¼ turn
counter clockwise using an appropriate flat-bladed screwdriver.
Remove the fuse carrier and replace the defective fuse.
Reinsert the fuse carrier in the same position that it was removed and
turn the carrier ¼ turn clockwise using an appropriate flat-bladed
screwdriver.