42
DHOLLANDIA
4.3
BRIDGE PLATE ADJUSTMENT
The angle of the bridge plate changes throughout the whole lift cycle. To maintain the correct set-up at every moment, the
bridge plate set-up can be altered by adjusting the following components.
Cam bridge plate(1): This cam regulates the moment the bridge plate will go from the upright position in the start of the lift cycle,
to the horizontal position when it is being used as a passage between the platform and the vehicle floor.
The rod (2) can be fixed to the cam (1) in one of nine positions. The difference between the result of various cam positions will
be rather large. When a smaller adjustment is needed, the rod itself can be manipulated.
Rod bridge plate (2): The length of the rod can be altered by releasing the counter nut and taking out the bolt that is attached
to the lift arm. Turn the eye hinge to change the length of the rod. Retighten the bolt and the counter nut when finished.
1
2
