DFSK Seres 3 2019, User Manual, Page: 209 / 233

Description of Charging and Discharging
- 208 -
2. Power battery temperature is lower
than 0℃ or higher than 40℃: the power
battery is allowed to heat or cool before
charging, and the vehicle is placed in an
environment with appropriate temperature,
and it can be charged after the temperature
is normal.
3.
Transient discharge of 12V battery:
lap the 12V power supply from other
vehicles, and charge the low-voltage
battery after the vehicle starts.
4.
220V 50HZ 10A standard
single-phase bipolar grounding socket has
no power: confirm whether the power
supply is equipped with overload
protection, use the special charging power
supply 250V 50HZ 16A standard
single-phase bipolar grounding socket.
5.
Fault of vehicle or AC charging
connection device: make sure that the
power system fault indicator is on the
integrated instrument, or there is a fault
voice prompt of charging system, stop
charging,
and suggest contacting
Chongqing Jinkang service center.
6.
Fault of charging pile or vehicle
display: make sure that the power system
fault indicator is on the integrated
instrument, or there is fault of charging
pile display, then stop charging and contact
the authorized service store of Chongqing
Jinkang.

Stop charging halfway
1. Power supply is off: after the power
is restored, charging will automatically
start again.
2. The charging cable is not well
connected: make sure that the charging
connection device cable is not connected.
3. The switch of charging connection
device is pressed: when the switch of
charging connection device is pressed, it
will stop charging, and the charging
connection device should be reconnected
for charging.
4. Power battery temperature is too
high: when the integrated instrument
shows that the power battery temperature
is too high, and
the alarm indicator is
on, the charging will stop automatically.
5. Cool the battery before charging
again.
6. Fault of vehicle or charging pile:
confirm that there is fault indication of
charging pile or vehicle, and suggest to
contact the authorized service store of
Chongqing Jinkang.
Discharge Method
1. If any, it can discharge the electric
appliance simultaneously through the
equipment inside and outside the vehicle.
a)
Discharge inside the vehicle is that
the vehicle is equipped with a socket to
directly
connect to the electrical
equipment;