DFSK Seres 3 2019, User Manual, Page: 202 / 233

Instructions for Use of EV Charging Plug
- 201 -
charging socket, press the button to unlock
the charging gun with your thumb evenly,
and insert the charging gun vertically into
the charging socket.
4.
Press the "UNLOCK" button of
charging gun and pull the charging gun
outward with force (no more than 200N) to
make sure it cannot be separated,
indicating that it is in place.
5.
After the connection correctly, swipe
card and charge according to the prompts
of the charging pile operating system.
Warnings

Charging gun are prohibited to be
inserted into charging gun holder
slantwise;

It is forbidden to swing the charging
gun from side to side when inserting, and
it must be inserted with force vertically;

When charging, the charging gun
cable must be straight and not twisted to
avoid forcing the charging gun holder.

During charging, the charging
operator must ensure that the charging
process is monitored, and the charging
process shall be terminated immediately in
case of severe weather including but not
limited to three types typhoon, rainstorm
and hail.

During charging, if the charging port
keeps emitting strong pungent smell,
immediately stop charging and report to
the device safety officer.
Charging Finishing Stage
1. After charging is completed, the
charging pile system will automatically cut
off the current, or manually cut off the
power supply of the charging pile before
drawing the charging gun.
2.
Hold the charging handle with one
hand, press the "UNLOCK" button with
your thumb, hold the lower end of the
charging gun with the other hand, and pull
out the charging gun vertically with equal
force.
3. Close the charging socket cover.
4. Close the dust cover of the charging
gun or insert the charging gun into the gun
holder of the charging pile.
Warnings

It is strictly prohibited to swing the
charging gun from side to side when
pulling it out; and the cover of charging
socket must be closed in place;

Close the dust cover of the charging
gun or insert the charging gun into the gun
the specified charging gun holder of
charging pile.
Maintenance
Charging gun clearing:
Under normal conditions, use a
high-pressure air gun or brush to clean it
weekly. If you do not have any condition,
you can use a clean cloth or cotton swab to
clean the charging socket. In case of any
unexpected circumstances such as
charging gun abandoned or dropped on the