www.dfi.com
29
Chapter 3 BIOS Setup
Chapter 3
29
Chapter 3 BIOS Setup
www.dfi.com
PC Health Status
This section displays the PC health status.
PC Health Status
Voltage
VCORE
5V
+12V
VDDQ
VBAT
3VSB
Temperature
System (
o
C/
o
F
)
CPU (
o
C/
o
F
)
Fan Speed
CPU FAN
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
0.864 V
5.017 V
11.968 V
1.200 V
3.168 V
3.344 V
38.5 C/ 101.3 F
45.5 C/ 113.9 F
0 RPM
Security
When Hidden, don’t ex-
poses TPM to 0
Current TPM Device
TPM State
TPM Availability
TPM Operation
Supervisor Password
Set Supervisor Password
Power on Password
Main
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Security
Boot
Exit
Rev. 5.0
<TPM 2.0 (DTPM)>
All Hierarchies Enabled, Owned
<Available>
<No Operation>
Not installed
<Disabled>
TPM Availability
Show or hide the TPM availability and its configurations.
TPM Operation
Enable or disable the TPM function. It displays the following options:
No Operation
No changes to current state.
Enable
Enable and activate TPM.
Set Supervisor Password
Set the supervisor’s password and the length of the password must be greater than
one character.
Power on Password
Disable
Input of password is required when accessing the BIOS Setup Utility.
Enable
Input of password is required during Power-on Self-test (POST).