www.dfi.com
24
Chapter 3 BIOS Setup
Chapter 3
24
Chapter 3 BIOS Setup
www.dfi.com
Audio Configuration
This section is used to configure the audio settings.
HD Audio
Control the detection of the HD audio device.
Disabled
HDA will be unconditionally disabled.
Enabled
HDA will be unconditionally enabled.
Auto
HDA will be enabled if present, disabled otherwise.
HD Audio
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
<Enabled>
Control Detection of the
HD-Audio device.
Disabled = HDA will be
unconditionally disabled
Enabled = HDA will be
unconditionally enabled
Auto = HDA will be ena
-
bled if present, disabled
otherwise.
Rev. 5.0
SATA Configuration
This section is designed to select the SATA controller and the type of hard disk drive which are
installed in your system unit.
SATA Controller(s)
This field is used to enable or disable Serial ATA devices.
SATA Speed
Select the SATA speed (generation): Auto, Gen1, Gen2, or Gen3.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Inter-
face).
RAID
This option allows you to create RAID or Intel Rapid Storage configuration on Serial
ATA devices.
Port 0/1
Enable or disable the serial ATA port.
Hot Plug
Enable or disable hot plug of the SATA port 0 (SATA 3.0).
Enable/Disable SATA
Device.
SATA Controller(s)
SATA Speed
SATA Mode Selection
Serial ATA Port 0
Port 0
Hot Plug
Serial ATA Port 1
Port 1
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
<Enabled>
<Auto>
<AHCI>
Empty
<Enabled>
<Disabled>
Empty
<Enabled>