41
ST102-CS
www.dfi.com
Trusted Computing
Configure Trusted Computing settings.
Security Device Support
This field is used to enable or disable BIOS support for the security device. A security
device will not be shown on the OS. TCG EFI protocol and INT1A interface will not be
available.
Pending operation
Schedule an opeartion for the security device. Your computer will reboot during restart
in order to change state of the security device.
PTN3460 Configuration
This section configures settings relevant to Trusted Computing innovations.
PTN3460 Function
Enabled or Disabled PTN3460 LCD Features.
LCD Panel Type
Select the resolution of the LCD Panel — 800X480, 800X600, 1024X768, 1366X768,
1280X1024, 1280X768, 1920X1080, or 1600X900.
LCD Panel Color Depth
Select the color depth of the LCD Panel — 18 Bit, 24 Bit, 36 Bit, 48 Bit.
Backlight Type
Enable or disable the serial ATA port and its hot plug function.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
TPM20 Device Found
Firmware Version:
Vendor:
Security Device Support
Pending operation
Advanced
7.63
IFX
[Enable]
[None]
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Enables or Disables
BIOS support for secu-
rity device. O.S will not
show Security Device.
TCG EFI protocol and
INT1A interface will not
be available.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
PTN3460 Function
LCD Panel Type
LCD Panel Color Depth
Backlight Type
Advanced
[Disabled]
[1024X768]
[18 Bit]
[PWM Mode]
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Enabled or Disabled
PTN3460 LCD Features.
Important:
The configuration must match the specifications of your LCD Panel in order for the
LCD Panel to display properly.