36
ST102-CS
www.dfi.com
RC ACPI Settings
Configure power management related settings in this page.
Wake system from S5
When Enabled, the system will automatically power up at a designated time every
day from the Real-time clock (RTC) battery. More settings will be displayed once
it’s switched to [Enabled] as detailed in the next page.
State After G3
Select between S0 State, Last State, and S5 State. This field is used to specify
what state the system is set to return to when power is re-applied after a power
failure (G3 state).
Enable or disable Sys-
tem wake on alarm
event. When enabled,
System will wake on the
hr::min::sec specified
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
RC ACPI Settings
Wake system from S5
State After G3
Advanced
[Disabled]
[S0 State]
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Select 0-23 For example
enter 3 for 3am and 15
for 3pm
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
RC ACPI Settings
Wake system from S5
Wake up hour
Wake up minute
Wake up second
State After G3
Advanced
[Enabled]
0
0
[S0 State]
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
0
When “Wake system from S5” is enabled, the following fields will appear.
Wake up hour
Press +/- to set the hour from 0 to 23.
Wake up minute
Press +/- to set the minute from 0 to 59.
Wake up second
Press +/- to set the second from 0 to 59.