DFI LanParty UT NF590 SLI-M2R/G User Manual Download Page 150

Page: 150 / 162

150

RAID

At this point you will be prompted to insert a floppy disk
containing the RAID driver. Insert the provided RAID driver
diskette.

Locate for the drive where you inserted the diskette then select
the NVIDIA nForce500 controller. Press <Enter> to install the
driver.

Now press <S> again to specify another device.

This time, select the NVIDIA nForce ATA RAID class controller.
Press <Enter> to install the driver. Make sure both files have
been installed or the setup will fail.

If you need to install other devices, please do so at this time
otherwise please proceed to the next step.

Follow the prompts on the screen to complete installation.

10. After installing the operating system, if in any case necessary,

create the hard drives' partition.

Installing the Sil3132 RAID Driver While in the Process of In-
stalling Windows

XP or Windows

2000

1. Start Windows Setup by booting from the installation CD.

2. Press <F6> when prompted at the beginning of Windows setup.

3. Press <S> to select “Specify Additional Device”.

4. At this point you will be prompted to insert a floppy disk con-

taining the RAID driver. Insert the provided RAID driver diskette.

5. Locate for the drive where you inserted the diskette then select

the Silicon Image controller. Press <Enter> to install the driver.

6. If you need to install other devices, please do so at this time

otherwise please proceed to the next step.

7. Follow the prompts on the screen to complete installation.

Summary of Contents for LanParty UT NF590 SLI-M2R/G



































































































































































Search results

Summary of Contents for LanParty UT NF590 SLI-M2R/G

Reviews:

Related manuals for LanParty UT NF590 SLI-M2R/G

Brands by name

Popular brands

DFI LanParty UT NF590 SLI-M2R/G, User Manual

Search results

Summary of Contents for LanParty UT NF590 SLI-M2R/G

Reviews:

Related manuals for LanParty UT NF590 SLI-M2R/G

Brands by name

Popular brands