DFI LanParty UT NF590 SLI-M2R/G User Manual Download Page 141

Page: 141 / 162

141

Supported Software

nVidia nTune

1. Click “nVidia nTune” on the main menu.

2. Setup is now preparing

the installation wizard.

Follow the prompts on
the screen to complete
installation.

3. NVIDIA nTune is an easy

monitoring application
that allows tuning of
gaming performance, set-
ting the system to quiet
operation when playing
DVD and monitoring the
system functions. nTune is
the safest way to change
the bus speeds, memory
timings and adjust
voltages.

4. Click “Benchmark and

automatically tune my
system” to view Bench-
marks and auto-tuning
results.

Summary of Contents for LanParty UT NF590 SLI-M2R/G



































































































































































Search results

Summary of Contents for LanParty UT NF590 SLI-M2R/G

Reviews:

Related manuals for LanParty UT NF590 SLI-M2R/G

Brands by name

Popular brands

DFI LanParty UT NF590 SLI-M2R/G, User Manual

Search results

Summary of Contents for LanParty UT NF590 SLI-M2R/G

Reviews:

Related manuals for LanParty UT NF590 SLI-M2R/G

Brands by name

Popular brands