100
3
BIOS Setup
MPS Version Control for OS
This field is used to select the MPS version that the system board is
using.
OS Select for DRAM > 64MB
Select the “OS2” option only if the system that is running an OS/2
operating system has greater than 64MB RAM.
HDD S.M.A.R.T. Capability
The system board supports SMART (Self-Monitoring, Analysis and
Reporting Technology) hard drives. SMART is a reliability prediction
technology for ATA/IDE and SCSI drives. The drive will provide
sufficient notice to the system or user to backup data prior to the
drive’s failure. The default is Disabled. If you are using hard drives
that suppor t S.M.A.R.T., set this field to Enabled. SMART is
supported in ATA/33 or later hard drives.
Delay for HDD (Secs)
This field is used to select the time that would delay the HDD
controller’s initial time. This is specially useful for some HDDs which
will not be ready at first boot when you power-on the system.
Full Screen Logo Show
This field is applicable only if you want a particular logo to appear
during system boot-up.
Enabled
The logo will appear in full screen during system boot-
up.
Disabled
The logo will not appear during system boot-up.