DFI LANParty UT ICFX3200-T2/G User Manual Download

Page: 148 / 183

148

Supported Software

9. Click “Yes, I want to

restar t my computer
now” then click Finish.

Restarting the system will
allow the new driver
installation to take effect.

nVidia GForce Driver

1. Click “nVidia GForce

Driver” on the main
menu.

Read the license agree-
ment then click “I accept
the terms in the license
agreement”. Click Next.

2. The installation wizard will

extract the files needed
to install the driver. After
all files have been ex-
tracted, click Next.

3. Follow the prompts on

the screen to complete
installation.

4. Reboot the system for

the driver to take effect.

Summary of Contents for LANParty UT ICFX3200-T2/G
























































































































































































Search results

Summary of Contents for LANParty UT ICFX3200-T2/G

Reviews:

Related manuals for LANParty UT ICFX3200-T2/G

Brands by name

Popular brands

DFI LANParty UT ICFX3200-T2/G, User Manual

Search results

Summary of Contents for LANParty UT ICFX3200-T2/G

Reviews:

Related manuals for LANParty UT ICFX3200-T2/G

Brands by name

Popular brands