DFI LANParty UT ICFX3200-T2/G, User Manual

Page: 121 / 183

121
3
BIOS Setup
Memory Timing Menu
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be
identical to this one.
Address/Command Timing
The options are Auto, 1T, 2T and 3T.
Memory Timing Select
Auto The system will automatically detect the memory
timing.
Manual Allows you to manually select the memory timing.
CAS Timing (TCAS)
This field is used to select the CAS timing.
RAS# to CAS# Delay (TRCD)
When DRAM refreshes, both rows and columns are addressed
separately. This field is used to select the delay time from RAS (Row
Address Strobe) to CAS (Column Address Strobe) when reading
and writing to the same bank. The lesser the clock cycle, the faster
the DRAM’s performance.
Address/Command Timing
Memory Timing Select
x CAS Timing (TCAS)
x RAS# to CAS# Delay (TRCD)
x RAS# Precharge Time (TRP)
x Cycle Time (TRAS)
x Row Cycle Time (TRC)
x Refresh to Active (TRFC)
x Bank to Bank Cmd (TRRD)
x Write Recovery (TWR)
x Read-Write Command (TRTW)
x Write-Write CS (TWTW_CS)
x Write-Read Command (TWTR)
x Write-Read CS (TWTR_CS)
x Read-Read CS (TRTR_CS)
x Read Data Transfer
Read Data Transfer
Read Strobe Delay
Read Strobe Arrival
Phoenix - AwardBIOS CMOS Setup Utility
Memory Timing Menu
Item Help
Menu Level
XXXX
↑↓→←
: Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Auto
Auto
4
4
4
12
16
28
2
4
3
2
2
2
2
4
Enable
Disabled
Diabled