DFI KD631-C236/Q170 User Manual Download Page 62

Page: 62 / 80

www.dfi .com

Chapter 5 RAID

Chapter 5

Step 3: Create a RAID Volume

1. When the Intel

RST option ROM status screen displays during POST, press <Ctrl> and

<I> simultaneously to enter the option ROM user interface.

2. Select 1: Create RAID Volume and press <Enter>.

3. Create a volume name and press <Enter>.

4. Use the up or down arrow keys to select the RAID level and press <Enter>.

5. Use the up or down arrow keys to select the strip size and press <Enter>.

6. Select the capacity and press <Enter>. You must select less than one hundred percent of

the available volume space to leave space for the second volume.

7. Press <Enter> to create the volume.

8. At the prompt, press <Y> to confirm volume creation.

9. Select 4: Exit and press <Enter>.

10. Press <Y> to confirm exit.

Step 3-1: Create a RAID Volume if the boot type is UEFI

If the boot type is set to UEFI, RAID volume creation will be different. Please use the following

steps to create RAID volumes. To set the boot type, enter the Insyde BIOS and go to “Boot” >

“Boot Type”.

1. Go to the “Advanced” menu of the Insyde BIOS and select “UEFI Device Manager”.

UEFI Device Manager Set-
ting



ACPI Confi guration



CPU Confi guration



Video Confi guration



Audio Confi guration



SATA Confi guration



USB Confi guration



PCI Express Confi guration



ME Confi guration



Active Management Technology Support



MEBX Confi guration



Debug Confi guration



UEFI Device Manager



SIO NUVOTON6106D



Console Redirection

Main

Advanced

Help

↑

↓

Select Item

F5/F6

Change Values

Setup Defaults

Esc

Exit

←

→



Select Item

Enter

Select



SubMenu

F10

Save and Exit

InsydeH2O Setup Utility

Security

Boot

Exit

Rev. 5.0

2. The screen displays all available drives. Select “Create RAID volume” to create a RAID

volume”.

3. Use the up or down arrow keys to select the RAID level and press <Enter>.

4. Use the up or down arrow keys to scroll through the list of hard drives and press <Enter>

to select the drive.

5. Press <Enter>.

6. Use the up or down arrow keys to select the strip size and press <Enter>.

7. Enter the volume size and press <Enter>.

8. At the prompt, press <Y> to confirm volume creation.

Summary of Contents for KD631-C236/Q170

















































































Search results

Summary of Contents for KD631-C236/Q170

Reviews:

Related manuals for KD631-C236/Q170

Brands by name

Popular brands

DFI KD631-C236/Q170, User Manual

Search results

Summary of Contents for KD631-C236/Q170

Reviews:

Related manuals for KD631-C236/Q170

Brands by name

Popular brands