DFI KD631-C236/Q170 User Manual Download Page 63

Page: 63 / 80

www.dfi .com

Chapter 5 RAID

Chapter 5

Step 4: Install the Intel Rapid Storage Technology Utility

The Intel Rapid Storage Technology Utility can be installed from within Windows. It allows

RAID volume management (create, delete, migrate) from within the operating system. It will

also display useful SATA device and RAID volume information. The user interface, tray icon

service and monitor service allow you to monitor the current status of the RAID volume and/

or SATA drives. It enables enhanced performance and power management for the storage

subsystem.

1. Download “KD631 IRST Driver” zip file at our website.

3. Read the license agree-

ment and click “I accept

the terms in the License

Agreement”. Then, click

“Next”.

2. Setup is ready to install

the utility. Click “Next”.

4. Go through the readme

document to view system

requirements and installa-

tion information then click

“Next”.

6. Confirm the installation and

click “Next”.

5. Click “Next” to install to

the default folder or click

“Change to choose another

destination folder”.

Summary of Contents for KD631-C236/Q170

















































































Search results

Summary of Contents for KD631-C236/Q170

Reviews:

Related manuals for KD631-C236/Q170

Brands by name

Popular brands

DFI KD631-C236/Q170, User Manual

Search results

Summary of Contents for KD631-C236/Q170

Reviews:

Related manuals for KD631-C236/Q170

Brands by name

Popular brands