DFI KD631-C236/Q170 User Manual Download Page 65

Page: 65 / 80

www.dfi .com

Chapter 5 Intel AMT Settings

Chapter 6

Chapter 6 - Intel AMT Settings

Overview

Intel Active Management Technology (Intel

AMT) combines hardware and software solution to

provide maximum system defense and protection to networked systems.

The hardware and software information are stored in non-volatile memory. With its built-in

manageability and latest security applications, Intel

AMT provides the following functions.

• Discover

Allows remote access and management of networked systems even while PCs are powered off;

significantly reducing desk-side visits.

• Repair

Remotely repair systems after OS failures. Alerting and event logging help detect problems

quickly to reduce downtime.

• Protect

Intel AMT’s System Defense capability remotely updates all systems with the latest security

software. It protects the network from threats at the source by proactively blocking incoming

threats, reactively containing infected clients before they impact the network, and proactively

alerting when critical software agents are removed.

Enable Intel

AMT in the Insyde BIOS

1. Power-on the system then press <Del> to enter the main menu of the Insyde BIOS.

2. In the Advanced menu, select Active Management Technology Support.

3. Select Enabled in the Intel AMT Support field.

Rev. 5.0

W h e n d i s a b l e d A M T
BIOS Features are no
longer supported and user
is no longer able to access
MEBx Setup.

Note :
This option does not dis-
able Manageability Fea-
tures in FW.

Active Management Technology Support

Intel AMT Support <Enabled>

Un-Confi gure ME <Disabled>

Advanced

Help

↑

↓

Select Item

F5/F6

Change Values

Setup Defaults

Esc

Exit

←

→



Select Item

Enter

Select



SubMenu

F10

Save and Exit

InsydeH2O Setup Utility

Rev. 5.0

AMT Confi guration



ACPI Confi guration



CPU Confi guration



Video Confi guration



Audio Confi guration



SATA Confi guration



USB Confi guration



PCI Express Confi guration



ME Confi guration



Active Management Technology Support



MEBX Confi guration



Debug Confi guration



UEFI Device Manager



SIO NUVOTON6106D



Console Redirection

Main

Advanced

Help

↑

↓

Select Item

F5/F6

Change Values

Setup Defaults

Esc

Exit

←

→



Select Item

Enter

Select



SubMenu

F10

Save and Exit

InsydeH2O Setup Utility

Security

Boot

Exit

Rev. 5.0

Summary of Contents for KD631-C236/Q170

















































































Search results

Summary of Contents for KD631-C236/Q170

Reviews:

Related manuals for KD631-C236/Q170

Brands by name

Popular brands

DFI KD631-C236/Q170, User Manual

Search results

Summary of Contents for KD631-C236/Q170

Reviews:

Related manuals for KD631-C236/Q170

Brands by name

Popular brands