49
On
Off
The activity of this wake-up event causes the timers to be
reset, i.e., the Power Management Unit (PMU) monitors the
specified activities as power management events.
The activity of this event will not affect the power manage-
ment timers.
Wake Up Event In Doze & Standby (IRQ3, 4, 8 and 12)
The default value is On.
HDD Power Mode
When enabled and after the set time of system inactivity, the hard drive
will be powered down while all other devices remain active. The default
value is Disabled.
Disabled
1Min-
15Min
This function cannot be executed.
The HDD Power Down mode will be set to one minute. The
option defines the continuous HDD idle that elapses before
the HDD enters the power saving mode (motor off).
Note: When a HDD is in power saving mode, any access to
the HDD will wake up the HDD.
Suspend Mode
When enabled and after the set time of system inactivity, all devices
except the CPU will be shut off. The default value is Disabled.
Disabled
1Min-1Hr
This function cannot be executed.
The Suspend mode will be set to one minute.
This option defines the idle time that elapses before the sys-
tem enters the Suspend mode.
