G586IPBS
Installing the Modules
A SIM module simply snaps into a socket on the system
board. Pin 1 of the SIM module must correspond with Pin 1
of the socket.
11
1. Position the SIMM above the socket with the “notch” in
the module aligned with the “key” on the socket.
2. Seat the module at a 45
o
angle into the bank. Make sure
it is completely seated. Tilt the module upright until it
locks in place in the socket.
Summary of Contents for G586IPBS
