G586IPBS
34
Zero Insertion Force (ZIF) Socket
To install an upgrade CPU, do the following.
1. Make sure the handle on the side of the ZIF socket is up.
To raise the handle, push down, pull it out to the side a
little and raise it as far as it will go. The top plate will
slide back. Do not use screwdrivers or other tools to
open the socket, or damage may occur to the system or
socket. It may be necessary to initially apply a small
amount of sideways force to free the handle from its
retaining “tab.” Once clear of the “tab,” the handle will
open relatively easily.
Summary of Contents for G586IPBS
