DFI G586IPBS, User Manual

Page: 23 / 44

G586IPBS
19
VRM Header
Your G586IPBS system board is equipped with a VRM
(Voltage Regulation Module) header shown below. It allows
you to upgrade to future low-voltage CPUs by installing a
Voltage Regulation Module.
VRM Header and 3.3V Pentium Processor
A DVRM (Dummy Voltage Regulation Module) must be
installed if you are using a 3.3V Pentium processor.
To Install:
Position the DVRM above the header. Make sure pins A1
and B1 of the module are aligned with pins A1 and B1 of
the VRM header (see the illustration on the next page).
Carefully slide the module into the slot. Press firmly on the
top of it to seat it properly. The handles on the VRM header
will lift up automatically to secure the module.