DFI CS636-C246 User Manual Download Page 22

Page: 22 / 73

User's Manual |

CS636

Chapter 2

HARDWARE INSTALLATION

Internal I/O Connectors

SATA Pin Assignment

The Serial ATA (SATA) connectors are used to connect the Serial ATA device. SATA 3.0 is sup-

ported by the five SATA ports and provides data rate up to 6Gb/s. Connect one end of the Se-

rial ATA cable to a SATA connector and the other end to your Serial ATA device.

BIOS Setting

Configure the Serial ATA drives in the Chipset menu (“PCH-IO Configuration” > “SATA And RST

Configuration”) of the BIOS. Refer to the chapter 3 for more information.

RX-

GND

TX+

TX-

GND

RX+

GND

SATA (Serial ATA)

SATA3 SATA 3.0 DOM supported

SATA2 SATA 3.0 DOM supported
SATA 3.0 Double Stack Connector:

SATA 1 (bottom)

SATA 0 (top)

•

4 x Serial ATA 3.0 internal ports, two of which support disk on module (DOM)

•

SATA 3.0 data transfer rate up to 6Gb/s

•

Integrated Advanced Host Controller Interface (AHCI) controller

•

Intel

Smart Response Technology

•

RAID 0, RAID 1, RAID 5, RAID 10

Features

The 8-bit Digital I/O (DIO) connector allows for input/output signals of digital logical states de-

fined by voltage levels.

Jumper Setting

Digital I/O power supply can be configured via jumper settings as instructed in

the previous

sections

Digital I/O Pin Assignment

Digital I/O

Internal I/O Connectors

Pin Function

DIO0

DIO1

DIO2

DIO3

DIO4

DIO5

DIO6

DIO7

GND

5V/5VDU

G2: GND (DOM only)

G1: 5V (DOM only)

Summary of Contents for CS636-C246










































































Search results

Summary of Contents for CS636-C246

Reviews:

Related manuals for CS636-C246

Brands by name

Popular brands

DFI CS636-C246, User Manual

Search results

Summary of Contents for CS636-C246

Reviews:

Related manuals for CS636-C246

Brands by name

Popular brands