DFI CS636-C246 User Manual Download Page 43

Page: 43 / 73

User's Manual |

CS636

Chapter 3

BIOS SETTINGS

→←: Select Screen

↑↓: Select Item

Enter: Select

+/- : Change Opt.

F1: General Help

F2: Previous Values

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

Chipset

LAN1(I219)

Enable or disable the onboard NIC for LAN1 (I219).

Wake on LAN Enable

Enable or disable integrated LAN to wake the system.

Above 4GB MMIO BIOS assignment

Enable/Disable above 4GB MemoryMappedIO BIOS assignment. This is enabled automatically

when Aperture Size is set to 2048MB.

Max TOLUD

Assign the maximum value of Top Of Lower Usable DRAM (TOLUD). Select to specify a fixed

value, or select "Dynamic" so that the assignment would adjust TOLUD automatically based on

largest MMIO length of installed graphic controller.

PCH-IO Configuration

PCI Express Configuration

settings

PCH-IO Configuration

►

PCI Express Configuration

►

SATA And RST Configuration

►

HD Audio Configuration

LAN1(I219)

Wake on LAN Enable

Above 4GB MMIO BIOS assignment

Max TOLUD

[Enabled]

[Disabled]

[Dynamic]

Note:

The sub-menus are detailed in following sections.

→←: Select Screen

↑↓: Select Item

Enter: Select

+/- : Change Opt.

F1: General Help

F2: Previous Values

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

Chipset

PCH-IO Configuration

Select one of the PCI Express channels and press enter to configure the following settings.

PCIE3/PCIE5/PCIE7/PCIE1/M.2-E/LAN2/M.2-M/PCIE6

Enable or disable the PCI Express Root Port. The following fields are only available when the

PCIe root port is enabled.

PCIe Speed

Select PCIe Speed of the current port — AUTO, Gen1, Gen 2, or Gen3. This field may not appear

when the speed of the port is not configurable.

Hot Plug

Enable or disable hot plug function of the port. This field may not appear when the port does

not support hot plug.

Detect Non-Compliance Device

Enable or disable this field to detect non-compliance PCIe devices in the PEG. This field is only

supported by PCIE1 and PCIE6.

PCI Express Configuration

PCI Express Root Port Set

tings.

PCI Express Configuration

PCIE3

PCIE5

PCIE7

PCIE1

M.2-E

LAN2

M.2-M

PCIE6

Summary of Contents for CS636-C246










































































Search results

Summary of Contents for CS636-C246

Reviews:

Related manuals for CS636-C246

Brands by name

Popular brands

DFI CS636-C246, User Manual

Search results

Summary of Contents for CS636-C246

Reviews:

Related manuals for CS636-C246

Brands by name

Popular brands