DFI CS636-C246 User Manual Download

Page: 52 / 73

User's Manual |

CS636

Chapter 4

INTEL AMT SETTINGS

Select Intel(R) AMT Configuration under Main Menu and then press Enter.

Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.55.1521

MAIN MENU

> Intel(R) ME General Settings

> Intel(R) AMT Configuration

MEBx Exit

[

↑↓

] =Move Highlight [Enter] =Select Entry [Esc] =Exit

Manageability Feature Selection

Select

Enabled

Disabled

then press Enter. When disabled, all the following fields will be hid-

den. After disabling the field, system restart is required.

Press Enter to enter the submenu.

Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.55.1521

Manageability Feature Selection

> SOL/Storage Redirection/KVM

> User Consent

Password Policy <Anytime>

> Network Setup

Activate Network Access

Unconfigure Network Access <Full Unprovision>

> Remote Setup And Configuration

> Power Control

Disabled

Enabled

INTEL(R) AMT CONFIGURATION

[

↑↓

] =Move Highlight <Enter> =Complete Entry [Esc] =Discard Changes

> SOL/Storage Redirection/KVM

Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.55.1521

Manageability Feature Selection <Enabled>

> SOL/Storage Redirection/KVM

> User Consent

Password Policy <Anytime>

> Network Setup

Activate Netwok Access

Unconfigure Network Access <Full Unprovision>

> Remote Setup And Configuration

> Power Control

INTEL(R) AMT CONFIGURATION

[

↑↓

] =Move Highlight [Enter] =Select Entry [Esc] =Exit

Intel(R) AMT Configuration

MEBX

Summary of Contents for CS636-C246










































































Search results

Summary of Contents for CS636-C246

Reviews:

Related manuals for CS636-C246

Brands by name

Popular brands

DFI CS636-C246, User Manual

Search results

Summary of Contents for CS636-C246

Reviews:

Related manuals for CS636-C246

Brands by name

Popular brands