DFI CS636-C246 User Manual Download

Page: 66 / 73

Chapter 6

SUPPORTED SOFTWARE

User's Manual |

CS636

3. Go through the readme docu-

ment for more installation tips

then click “Install”.

5. After completing installation,

click “Restart Now” to exit

setup.

Restarting the system will al-

low the new software installa-

tion to take effect.

4. The step displays the installing

status in the progress.

Intel HD Graphics Drivers

1. Setup is now ready to install

the graphics driver. Click

“Next”.

2. Read the license agreement

then click “Yes”.

By default, the “Automatically run WinSAT and enable the Windows Aero desktop theme” is

enabled. With this enabled, after installing the graphics driver and the system rebooted, the

screen will turn blank for 1 to 2 minutes (while WinSAT is running) before the Windows 10

desktop appears. The “blank screen” period is the time Windows is testing the graphics perfor-

mance.

We recommend that you skip this process by disabling this function then click “Next”.

Summary of Contents for CS636-C246










































































Search results

Summary of Contents for CS636-C246

Reviews:

Related manuals for CS636-C246

Brands by name

Popular brands

DFI CS636-C246, User Manual

Search results

Summary of Contents for CS636-C246

Reviews:

Related manuals for CS636-C246

Brands by name

Popular brands