31
2
English
English
2.3 AGP Pro Slot
The system board is equipped with a universal AGP Pro slot that
supports 2x/4x AGP or AGP Pro add-in card. If you are using 2x/4x
AGP add-in card, make sure you install the card between the 20-pin
and 28-pin bays of the slot. Installing it incorrectly may damage the
card or the system board. AGP Pro add-in cards, on the other hand,
will fit into the AGP Pro slot in only one orientation thus preventing
you from installing the add-in card incorrectly. Align the add-in card
above the slot and push it down firmly with even pressure on both
sides of the top, until it is completely seated. The AGP 4x LED will
light only when the AGP Pro slot is installed with a 4x add-in card.
Location for installing a 2x/4x AGP or AGP Pro add-in card
20-pin bay
28-pin bay
