17
1
Quick Setup Guide
Quick Setup
Guide
1.3.14 Front Panel LEDs and Switches
1
HDD LED Power
2
HDD
3
N. C.
4
Green LED Power
5
Ground
6
N. C.
7
PWRBT
8
Ground
9
N. C.
1 0 SMI
1 1 Ground
1 2 N. C.
1 3 H/W Reset
1 4 Ground
1 5 N. C.
1 6 Speaker Data
1 7 N. C.
1 8 Ground
1 9 Speaker Power
2 0 N. C.
2 1 LED Power (+)
2 2 N.C.
2 3 LED Power (-) or
Standby Signal
When the system is in the S1 (POS - Power On Suspend) state, the
Green LED and Power/Standby LED will blink every second.
When the system is in the S3 (STR - Suspend To RAM) state, the Power/
Standby LED will blink every 4 seconds.
If a system did not boot-up and the Power/Standby LED did not light
after it was powered-on, it may indicate that the CPU or memory module
was not installed properly. Please make sure they are properly inserted
into their corresponding socket.
