7 8
3
BIOS Setup
Soft-Off by PBTN
This field allows you to select the method of powering off your
system.
Delay 4 Sec.
Regardless of whether the Power Management func-
tion is enabled or disabled, if the power button is
pushed and released in less than 4 sec, the system
enters the Suspend mode. The purpose of this func-
tion is to prevent the system from powering off in
case you accidentally “hit” or pushed the power but-
ton. Push and release again in less than 4 sec to
restore. Pushing the power button for more than 4
seconds will power off the system.
Instant-Off
Pressing and then releasing the power button at
once will immediately power off your system.
Wake Up On LAN
Set this field to Enabled to wake up the system via the onboard
LAN or via a LAN card that uses the PCI PME (Power Manage-
ment Event) signal to remotely wake up the system. Access to the
LAN card will cause the system to wake up. Refer to the card’s
documentation for more information.
Resume By Ring
When this field is set to Enabled, the system will power-on to re-
spond to calls coming from an external modem.
Power-On By Alarm
Enabled
When Enabled, you can set the time you would like the
Soft Power Down (Soft-Off) PC to power-on in the
“Time (dd:hh:mm) of Alarm” field. However, if the sys-
tem is being accessed by incoming calls or the network
prior to the time set in the field, the system will give
priority to the incoming calls or network.
Disabled
Disables the automatic power-on function. (default)
