35
2
Hardware Installation
USB (Universal Serial Bus)
The system board supports 8 USB 2.0/1.1 ports. Four onboard
USB 2.0/1.1 ports (Black) are at locations CN2 (USB 1-2) and
CN3 (USB 3-4) of the system board.
The J8 (USB 5-6) and J7 (USB 7-8) connectors allow you to
connect 4 additional USB 2.0/1.1 ports. Your USB ports may come
mounted on a card-edge bracket. Install the card-edge bracket to an
available slot at the rear of the system chassis then insert the con-
nector that is attached to the USB port cables to J7 or J8. Make
sure pin 1 of the cable connector is aligned with pin 1 of the J7 or
J8.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
(“Onboard Device” section) of the BIOS. Refer to chapter 3 for
more information.
W
USB 5-6
W
USB 7-8
USB 4
USB 3
W
1
VCC
-Data
+Data
GND
Key
VCC
-Data
+Data
GND
N.
C
.
2
1 0
9
USB 2
USB 1
