62
Warning:
Do not install Windows 95 from your CD-ROM drive. You will not be able to
install the operating system successfully. This is because Windows 95 does
not support hardware drivers that would recognize the TX chip.
Installing IDE Drivers for Windows
95
The table below shows the INF files that must be installed into your
system. The INF files will allow Windows 95 to recognize the TX chip.
Files
1. MSHDC.INF
2. MACHINE.INF
1. MSHDC.INF
2. MACHINE.INF
3. USB.INF
Version
OSR2
OSR2.1
To install:
1. Boot up Windows 95.
2. Insert the Intel PIIX/PIIX3/PIIX4 IDE driver diskette in floppy drive A
or drive B.
3. In the Windows 95 desktop, select “Start”.
4. In “Start”, select “Programs”.
5. In “Programs”, select “MS-DOS Prompt”.
6. Type “CD WINDOWS” and press <Enter>. (C:\WINDOWS>)
7. Type “CD INF” and press <Enter>. (C:\WINDOWS\INF>)
8. Change “MSHDC.INF”, “MACHINE.INF” and “USB.INF” to
“MSHDC.000”, “MACHINE.000” and “USB.000” as shown below.
Ex: C:\WINDOWS\INF>COPY MSHDC.INF MSHDC.000
C:\WINDOWS\INF>COPY MACHINE.INF MACHINE.000
C:\WINDOWS\INF>COPY USB.INF USB.000 (for Win95
OSR2.1 only)
