25
Clearance Requirements
Your processor comes with a heatsink mounted on top. To maintain
proper airflow once the upgrade is installed on the system board, the
processor and heatsink require certain space clearances. The clearance
above the processor’s fan/heatsink must be at least 0.4 inches. The
clearance on at least 3 of 4 sides of the processor and heatsink must be
at least 0.2 inches. All cables (for floppy drive, hard drive, CD-ROM,
etc.) must be routed clear of the processor and its airspace.
Fan Exhaust
The processor must be kept cool by using a fan with heatsink. The tem-
perature of the air entering the fan/heatsink cannot exceed 45
o
C (113
o
F).
The ambient or room temperature must be below 37
o
C (99
o
F).
Jumper JP26
Modem Ring-on Select
The 586TXD system board sup-
ports Modem Ring-on feature which
allows the Soft Power Down (Soft-
Off) PC to power on to respond to
incoming calls. With a modem in-
stalled, you can remotely transmit
or access data without physically
going to your system. To “power
on” your system, follow the steps
on the next page.
Jumper Settings for Modem Ring-on
