44
Power Management
This category allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before each of the
following modes are activated: Doze Mode, Standby Mode, and Sus-
pend Mode.
No power management. Disables the Doze, Standby and
Suspend modes.
Minimum power management. Doze Mode = 1 hr., Standby
Mode = 1 hr., and Suspend Mode = 1 hr.
Maximum power management. Doze Mode = 1 min.,
Standby Mode = 1 min., and Suspend Mode = 1 min.
Allows you to set each mode individually. When enabled,
each option ranges from 1 min. to 1 hr.
Disable
(default)
Min. Power
Saving
Max. Power
Saving
User
Defined
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management
PM Control by APM
Video Off Method
Video Off After
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
Throttle Duty Cycle
VGA Active Monitor
Soft-Off by PWR-BTTN
Resume by Ring
Resume by Alarm
** Break Event From Suspend **
IRQ 8 Clock Event
: Disabled
: Yes
: V/H SYNC+Blank
: Standby
: Disabled
: Disabled
: Disabled
: Disabled
: 62.5%
: Enabled
: Hold 4 Sec.
: Enabled
: Disabled
: Disabled
** Reload Global Timer Events **
IRQ [3-7, 9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: Disabled
ESC
F1
F5
F6
F7
: Quit
: Help
: Old Values
: Load Fail-Safe Settings
: Load Optimal Settings
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color
↑ ↓ → ←
PM Control by APM
An Advanced Power Management device will be activated to
enhance the Max. Power Saving mode and stop the CPU’s
internal clock. Use this option in Windows 95. (default)
The system BIOS will ignore APM when initiating the Power
Management mode.
Yes
No
