DFI 586ITXD, User Manual

Page: 58 / 90

A
Installation Instructions
59
This chapter summarizes the steps to install the system board into
your system unit. It also includes a description of the area in which
you must work and directions for memory installation. Before
installing the system board, obtain the memory you plan to install.
Refer to the System Memory section for the number and type of
memory modules needed for the amount of memory you require.
Preparing the Area
Before unpacking the system board, make sure the location you
have selected is relatively free of dust and static electricity. Excessive
exposure to dust, static electricity, direct sunlight, excessive humidity,
extreme cold, and water can damage the operational capabilities of
your system board. Avoid placing the unit on surfaces such as
carpeted floors. These areas also attract static electricity which can
damage some circuits on your system board.
Make sure the power source has a properly grounded, three-
pronged socket. It is essential that the power connection be
properly grounded for correct functioning of your system board. For
further protection, we recommend that you use a surge suppressor.
This will protect the system board from damage that may result
from a power surge on the electrical line.
Move items that generate magnetic fields away from your system
board since magnetic fields can also damage your system board.
Once you have selected the ideal location, unpack the system board
carefully.
Handling the System Board
It is quite easy to inadvertently damage your system board even
before installing it in your system unit. Static electrical discharge can
damage computer components without causing any signs of physical
damage. You must take extra care in handling the system board to
ensure against electrostatic build-up.
Static Electricity Precautions
1. To prevent electrostatic build-up, leave the board in its anti-static
bag until you are ready to install it.