10
Maximum cutting width – please refer to the original specification
Cut length repeatable accuracy
1mm.
Band/sleeve positional accuracy on product in the vertical plane 1mm prior to shrinking.
1.4.5
F
ULL
S
POOL
U
NWIND
The Full Spool Unwind is controlled by a photo electric switch which via the programmable
logic controller, operates a A.C. motor driven feed controller which creates slack web to feed
the cutting head.
Full spool diameter – 500mm maximum.
Core size – 101mm, or as per specified in your order.
Lay-flat width – as per specified in your order.
1.4.6
O
PTIONS
Conveyor Belt
Conveyor lengths of 5 meters.
Conveyor slat width of 100mm in either stainless steel or acetal.
Conveyor motor – ½ HP Permanent Magnet A.C. as standard.
Conveyor speed can vary.
Conveyor must not be subject to extreme vibration.
Product Pitching
Product can be pitched, where required, by scrolls mounted on the conveyor.
Product Centralizing
Product can be centralized, where required, by a double belt centralizer unit mounted to the
conveyor.
The machine is not protected from build back of product from a subsequent machine.
A constant flow of product is needed. No undue pressure of product must be allowed to
affect the operation of the pitching/centralizer mechanisms.
Heat Tunnels
Shrinking is achieved by hot air, manifold through a series of outlets (nozzles) designed to
suit the product. Heat tunnels are constructed on adjustable frame work systems which fits
around the conveyor belt.
Maximum product diameter: 102mm
Maximum product height: 350mm.
Wipedown
Wipdedown for banding operations is normally achieved by a metal skid plate which pushes
the banding material down short distances securely onto the product.
Often for sleeving, wipedown is achieved by rotating brushes with soft rubber flails or bands.
Summary of Contents for NSV-400
Page 3: ...4 1 3 BASIC BLUEPRINTS...