Appendix C: IP Address, Subnet and Gateway
Appendix B: IP Address, Subnet and Gateway
This section discusses Communities, Gateways, IP Addresses and Subnet masking
Communities
A community is a string of printable ASCII characters that identifies a user group with
the same access privileges. For example, a common community name is “public.”
For security purposes, the SNMP agent validates requests before responding. The
agent can be configured so that only trap managers that are members of a community
can send requests and receive responses from a particular community. This
prevents unauthorized managers from viewing or changing the configuration of a
device.
Gateways
Gateway, also referred to as a router, is any computer with two or more network
adapters connecting to different physical networks. Gateways allow for transmission
of IP packets among networks on an Internet.
IP Addresses
Every device on an Internet must be assigned a unique IP (Internet Protocol) address.
An IP address is a 32-bit value comprised of a network ID and a host ID. The
network ID identifies the logical network to which a particular device belongs. The
host ID identifies the particular device within the logical network. IP addresses
distinguish devices on an Internet from one another so that IP packets are properly
transmitted.
IP addresses appear in dotted decimal (rather than in binary) notation. Dotted
decimal notation divides the 32-bit value into four 8-bit groups, or octets, and
separates each octet with a period. For example, 199.217.132.1 is an IP address in
dotted decimal notation.
To accommodate networks of different sizes, the IP address has three divisions –
Classes A for large, B for medium and C for small. The difference among the
network classes is the number of octets reserved for the network ID and the number
of octets reserved for the host ID.
Class Value of First Octet
Network ID
Host ID
Number of Hosts
A
1-126
First octet
Last three octets
16,387,064
B
128-191
First two octets
Last two octets
64,516
C
192-223
First tree octets
Last octet
254
Any value between 0 and 255 is valid as a host ID octet except for those values the
InterNIC reserves for other purposes
Value
Purpose
0, 255
Subnet masking
127
Loopback testing and interprocess communication on local devices
224-254 IGMP multicast and other special protocols.
iCAMView user manual -85-
