Appendix A: Router Configuration
Line #2:
Starting Port:
9001
Ending Port:
9001
Server IP Address:
Type in the
camera’s IP address
, for example:
192.168.0.5
5. Click
Apply
to save the settings. IP Camera should now be configured to work with
your router and be accessible from the internet.
FVS318 – ProSafe VPN Firewall
1. Log into your router using your router IP.
2. On the main page, click on
Add Service
on the left side of the screen.
3. Click Add Customer Service.
4. In the
Name
field enter a name for the camera, for example:
IP Camera Web
:
Type: TCP
Start Port:
81
Finish Port:
81
5. Click
Apply
to save the settings.
6. There is a bug in the NETGEAR FVS318 1.4 firmware that does not record any
entry that uses port 80. If you intend to use port 80, you will initially need to enter 81
for the Start and Finish port, and then edit the entry to port back to 80. Click on
Add
Service
on the left side of the screen.
7. In the
Service Table
window select IP Camera Web and click
Edit Service
.
8. Change the
Start
and
Finish
port to
80
. Click
Apply
.
9. On the main page, click on
Add Service
on the left side of the screen and then click
Add Custom Service
. In the
Name
field enter a name for the camera, for example:
IP
Camera Cam
.
Type: UDP
Start Port:
9001
Finish Port:
9001
10. Click
Apply
to save the settings.
11. On the main page, click on
Ports
at the side of the screen.
A.
Click
Add
.
B. For Service Name select: IP Camera Web
C.
Action:
ALLOW always
iCAMView user manual -78-
