Chapter 4: Using Utility to Setup IP & Update Firmware
You will need to setup this section if you are using a Dynamic IP
If you do not already have a Domain Name registered with your ISP, select from
one of the 4 Free DDNS service providers (zive.org, dhs.org, dyndns.org or
myddns.org). Follow the link to the respective free service providers to register a
Domain Name and obtain a User Name and Password. Enter these details in the
boxes provided
8. Click “Next >” to change your administrator account and password information.
9.
An administrator account is necessary to ensure privacy. The user may revert to
default settings, or if you do not set one, just delete the account and password and
click “Next”.
WARNING:
Do not lose the administrator account and master password. Once
set, you will not be able to re-configure IP Camera after reset without the
administrator account and password. To reset the IP Camera account password,
you will need to re-install the firmware using Utility.
iCAMView user manual -12-
