NDS3228A 8 in 1 MPEG-2 H.264 SD
Encoder User’s Manual
33 / 55
In this field, users can decide whether to effect the SDT insertion function.
MPTS Filter Null Packet
If this function is effected, then the null packets in IP output stream will be filtered.
PSI/SI Editor
This button will trigger the PSI/SI Editor for some users’ advanced usage. For more detail,
please refer to the manual of PSI/SI.
4.3.1.1 Video Parameters
NOTE:
1.
Bit Rate Mode & Max Video Bit-rate
Users can only modify the Max Video Bit Rate when the Bit-rate mode is VBR, while CBR
mode is selected, Max Video Bit Rate box turns gray and users can just check it.
Input channel selection area. The interface and
setting principle of each channel are the same.
User
can
select
the
mode or type
of each item
by
clicking
the Radio Box
under
the
corresponding
item.
User can set
the
standard
and
other
parameters of
video of each
item in this
area
by
clicking
the
pull-down
trigger.
User can set the parameters of the video
brightness, contrast, saturation, and Hue by
moving respective slider. Figures at the
beginning and end indicate the adjustment
range.
