NDS3228A 8 in 1 MPEG-2 H.264 SD
Encoder User’s Manual
31 / 55
Set:
to make the current parameters, which shows in the NMS software, activate.
Get:
to read the current device’s activating parameters and show them on NMS software.
IP Out Enable
Check the checkbox with ―√‖, then the IP output is enabled, otherwise it is not. Users can
decide whether to open the IP output function or not.Users can modify the IP address here as
well.
IP Out Address/Service IP Address/Service Mask/Service Gateway
Users can set the address by modifying the value in these four fields.
Device Mode
User can click
to triger a pull-down list to select the device mode.
1IP:
This mode refers to MPTS and outputs the programs which have been multiplexed. Users
need to enable the IP Output by checking the checkbox
in interface 4.3.1.1
General Parameters. (The device will automatically enable IP Outout founction if users set
Users
can
check
version
information in this area.
