![background image](http://html1.mh-extra.com/html/dexford/pmr700/pmr700_user-manual_2490158024.webp)
- English -
24
Note:
You can also use rechargeable NiMH batteries. Rechargeable batteries cannot be
charged while in the radios.
1.
To release the belt clip, press on the upper tab and slide the belt clip upwards.
2.
Then open the compartment by sliding the cover downwards.
3.
Now insert the batteries taking care to ensure that the polarity is correct. Incorrect polarity
can damage the unit.
4.
Close the battery compartment and re-fix the belt clip.
If the batteries are discharged, you will hear signal tones or it will no longer be possible to
switch the radio on.
3.3
Removing and fitting the belt clip
To release the belt clip, press on the upper tab and slide the belt clip upwards.Slide the belt clip
into the guide from above until it audibly engages.
4
Operation
4.1
Switching the radios on and off
To switch on the radio, hold the On/Off button
MENU
pressed until a signal tone sounds.
The display will show the currently selected channel between 1 and 8.
To switch the radio off, hold the On/Off button
MENU
pressed once more until a signal tone
sounds.
4.2 Volume
control
The volume of the built-in loudspeaker can be displayed in 8 volume steps using the
and
buttons. The selected volume will be shown in the display with
v1
to
v8
.
4.3 Channel
selection
The radios have 8 different transmission channels, which are approved by the European
Committee for Radio Communications as " Private Mobile Radio" channels, known as PMR for
short.
In order to be able to speak between two radios, both units must be set to the same
channel.
1.
Press the
MENU
button once.
2.
Select the required channel using the
and
buttons.
3.
Confirm the selection with the
PTT
talk
button on the left-hand side.
Summary of Contents for PMR700
Page 28: ......