System DD11 / System DD21
Operating the control keypads
82774 2.0
59
Adjusting the table to a saved height position
This function allows you to set the table to a saved table position.
1
Press and hold the memory key that corresponds to the desired table position (e.g.
position 2).
The table will move as long as the memory key is pressed. If you release this key
before the saved position is reached, the table will stop before it reaches this posi-
tion.
2
Release the key when the table has reached the saved position.
073
The current (saved) position is shown on the display.
Adjusting the motor group 2 to a saved position
This function allows you to set the table (motor group 2) to a saved table position.
If there is no second motor group, then the
and
keys are assigned the same func-
tions as the
and
keys.
Move table upwards (motor group 2):
1
Press the
key for moving up. Press the key down until the table has reached
the saved position.
The table will move up as long as the memory key is pressed. If you release this
key before the saved position is reached, the table will stop before it reaches this
position.
Move table upwards (motor group 2):
2
Press the
key for moving up. Press the key down until the table has
reached the saved position.
The table will move down as long as the memory key is pressed. If you release this
key before the saved position is reached, the table will stop before it reaches this
position. Release the key when the table has reached the saved position.
