Operation
IPROXX 2
22
74828(c)
4.9 iOS smart phone
4.9.1 Installing the app on your smart phone
•
Open the app store
•
Download the "
Dewert smart remote
" app from the app store
4.9.2 Discovering new devices on your iOS smart phone
The
IPROXX 2/SMP/
Bluetooth
®
model can be discovered on your smart phone so that you can use
the smart phone app for operations.
Requirements:
•
The
Bluetooth
®
function in the smart phone is activated.
•
The handset is connected to a control unit.
•
The control unit is connected to the power supply.
Before the discovery process, you should have configured all settings
for the patient, as de-
scribed in section 4.7.4. Key 9 (
Bluetooth
®
)
must
be activated (enabled).
a) Initial commissioning (before smart phone discovery)
1
Insert the key into the turnkey lock (on the IPROXX 2/SMP/
Bluetooth
®
).
2
Turn the key until the arrow on the turnkey lock is set to "Changing mode" (
). Then activate
the
Bluetooth
®
function as described in section 4.7.4.
3
Turn the turnkey back until the arrow is pointing towards the (unlocked). The
Bluetooth
®
LED
should now be flashing blue.
4
Activate
Bluetooth
®
on your smart phone.
5
Start the "
Dewert smart remote
" app. Go to Settings (
). The available
Bluetooth
®
devices will
be shown.
6
Select the
Bluetooth®
device (IPROXX ...).
7
Pair with the smart phone.
8
You can use the app when the turnkey lock is set to either unlocked ( ) or to patient mode (
). Function enabled for patients are then shown in the app.
9
The status LEDs are illuminated in green next to key pairs that are enabled. They are not lit for
key pairs that are disabled.
