background image

In addition to the warranty, D

E

WALT tools are covered by our:

1 YEAR FREE SERVICE

D

E

WALT will maintain the tool and replace worn parts caused by 

normal use, for free, any time during the first year after purchase. 

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of your 
D

E

WALT Power Tool, Laser, or Nailer for any reason, you can return 

it within 90 days from the date of purchase with a receipt for a full 
refund – no questions asked.

LATIN AMERICA: 

This warranty does not apply to products sold 

in Latin America. For products sold in Latin America, see country 
specific warranty information contained in the packaging, call the 
local company or see website for warranty information.

FREE WARNING LABEL REPLACEMENT:

 If your warning labels 

become illegible or are missing, call 1-800-4-D

E

WALT (1-800-433-

9258) for a free replacement.

Troubleshooting

Problem

Possible Cause

Possible Solution

Unit will not start.

Cord not 
plugged in.

Plug tool into a working 
outlet.

Circuit fuse is 
blown.

Replace circuit fuse. (If 
the product repeatedly 
causes the circuit fuse 
to blow, discontinue use 
immediately and have it 
serviced at an authorized 
service center.)

Circuit breaker is 
tripped.

Reset circuit breaker. (If 
the product repeatedly 
causes the circuit breaker 
to trip, discontinue use 
immediately and have it 
serviced at an authorized 
service center.)

Cord or switch is 
damaged.

Have cord or switch 
replaced at an authorized 
service center.

English

10

Summary of Contents for DWE315K











Reviews: