ENGLISH
28
• Do not pour cutting fluid into the reservoir
while it is mounted in the bracket. Do not allow
cutting fluid to enter the drill motor.
• Before use, ensure movable chuck guard
operates properly.
• Ensure that metal chips or resinous residue
cannot lead to blockage of the function.
• In case of jammed cutter disconnect the
machine from the power supply, remove
the reason for the jam before turning on the
machine again.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of personal injury from flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Package Contents
The package contains:
1 Magnetic drill press
1 Drill guard
3 Handles
1 Hub
1 Safety chain
1 Lubrication system
1 Hex tool
1 3 jaw chuck with adaptor
1 Kitbox
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1, 5)
WARNING:
Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off power/magnet switch
b. Off button for motor
c. On button for motor
d. Gear selector
e. Magnetic bracket
f.
Feed
handle
g. Hub
h. Tool holder
i.
Quick-release
collar
j.
Guard
k. Coolant
bottle
l.
Coolant
tube
m. Flow regulator
n. LED indicator light
o. Safety chain (fig. 5)
INTENDED USE
Your DWE1622 magnetic drill press has been
designed for drilling holes in steel construction
surfaces. Do not drill into non-ferrous metal.
DO NOT
use under wet conditions or in presence of
flammable liquids or gases.
This drill press is a professional power tool.
DO NOT
let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D
E
WALT tool is designed in class I (grounded)
according to EN 61029. Earth wire is required.
