20
EngLIsh
EC-Declaration of Conformity
Machinery Directive
Tool Grinding and Honing Machine
DW755
D
e
WALT
declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN61029-1:2009 +A11:2010, EN61029-2-4:2011.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Director Engineering
D
e
WALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
15.03.2018
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
WARNING:
Indicates a potentially hazardous situation
which, if not avoided,
could
result in
death or
serious injury
.
CAUTION:
Indicates a potentially hazardous situation
which, if not avoided,
may
result in
minor or
moderate injury
.
NOTICE:
Indicates a practice
not related to
personal injury
which, if not avoided,
may
result in
property damage
.
Denotes risk of electric shock.
Denotes risk of fire.
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
DW755
Voltage
V
AC
230
UK & Ireland
V
AC
230/115
Type
2
Rated current
A
1.86
Motor power (input)
W
415
Motor power (output)
W
300
No-load speed
min
-1
2750
Max. wheel diameter
mm
150
Max. wheel width
mm
20
Wheel bore
mm
20
Belt speed
m/min
1200
Belt dimensions
mm
715 X 45
Weight
kg
9.3
Noise values and vibration values (triax vector sum) according to EN61029:
L
PA
(emission sound pressure level)
dB(A)
75
L
WA
(sound power level)
dB(A)
88
K (uncertainty for the given sound level)
dB(A)
3.0
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING:
The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
English (original instructions)
TOOL GRINDING AND HONING MACHINE
DW755
Summary of Contents for DW755
